Leave a message
Leave a message
Click me niloloko lang kita Click me niloloko lang kita Click me niloloko lang kita Click me niloloko lang kita
Hospital Equipment Depot
Main Category

Medical Diagnostic Xray Unit F99  IBT
Medical Diagnostic Xray Unit
Email for pricing


Comparable with the other xray units, the F99 IBT Medical Diagnostic Xray Unit is fully featured with the most advanced technology and essential functions in radiographic and diagnostic imaging. With its best features and high technology components such as the H.T Generator, Diagnostic Table, Xray Tube Assembly, H.T Cable, Collimator and optional Radiographic Table, Vertical Bucky Stand, Tomographic Attachment, Remote Control and TV system will exactly fit your exact requirements in radiographic and diagnostic imaging.

The F99 IBT Medical Diagnostic Xray Unit can perform many radiographic functions such as fluoroscopy, routine radiography, spot film radiography, bucky radiography and linear tomographic imaging. This xray unit uses a tube current of 500mA for precise and accurate diagnostic imaging of the organs being radiographed. This has been designed to operate at 380 V, single-phase power. The xray tube of this medical diagnostic xray unit is mounted inside a protective housing designed for excessive radiation protection and electric shock. The protective housing of this xray tube also provides mechanical support for the xray tube and protects the tube from damage caused by rough handling. This xray unit comes has spot film device with self-centering holder for cassettes of different sizes and electromagnetic locks to allow maximum level of radiation protection during fluoroscopic procedures. The xray unitís tube stand comes with telescopic rotating tube arm, electromagnetic locks and safety cable device. The collimator is adjusting mechanically when used under the diagnostic table and manually when used over the diagnostic table. The tabletop of the radiographic table can be moved longitudinally and transversely and comes with an oscillating buck, which is mounted under the radiographic table to ensure easy positioning of the patient and accurate aiming of the xray beam. The table is motor-driven and can be tilted to ensure accurate patient positioning for routine fluoroscopy and spot film examinations, as well as it has the function to float for general radiographic examinations. This xray unit has been designed with an interface, which can be connected to a TV system during fluoroscopic procedures.

Check out on this excellent model of Medical Diagnostic Xray Unit and be assured of superior quality and reliability.

  • Fluoroscopy
    1. Voltage: 0.05mA, 45 to 110kV, continuously adjustable Radiography
    2. Xray Tube Voltage: 44 to 125kV, 44 steps
    3. Xray Tube Current 1mA to 500mA, adjustable by steps
    4. Xray Exposure Time: 0.02 to 5seconds, adjustable by 23 steps
    5. Diagnostic table
    6. Table Tilting: positive 90 degrees to 0 degree to 15 degrees motor driven
    7. Table Top Movement: 500mm at head end, motorized
    8. Spot Film Device: Moving Range:
      1. Longitudinal: 720mm, motorized
      2. Transverse: 220mm, motorized
      3. Compressed: 300mm, motorized
  • Xray Tube Assembly
    1. Xray Unit Model: XD51 20,40 over 125
    2. Xray Tube Focus: 1 x 1mm or 2 x 2mm
  • Power supply
    1. Voltage: Single Phase: 380V
    2. Capacity: 50kVA
    3. Frequency: 50Hz
    4. Inner Resistance: 0.3 Ohms
© 2006. Hospital Equipment. All rights reserved